After the circular knitting needles are unpacked and unboxed, attention should be paid to the correct operation and maintenance of the knitting needles at every stage from loading on the machine, normal production, long-term shutdown, and sealing off the machine. If handled properly, it will be beneficial to the smoothness of the fabric, the stability of the weaving process and the service life of the knitting needles.

1.When the knitting needles have just been unpacked and put on the machine and unloaded: first check the quality of the knitting needles, because if unopened knitting needles are stored for too long and the storage environment is not good, rust spots or anti-rust oil will appear on the surface of the knitting needles. It dries out and produces a hard oil film, which makes the needle latch inflexible, which is not conducive to weaving and makes it difficult to remove the cloth. After inserting the needle and starting to unload the fabric, you should use a refueling bottle to add some knitting lubricating oil to the knitting needle. This will ensure that the knitting needle is properly lubricated and reduce damage to the pins and needle latch when starting the machine. You should also pay attention to the position of the yarn guide, the position of the knitting needle, and the adjustment of the cam. These can cause damage to the knitting needle and should be adjusted to a more reasonable position. After unloading the cloth, start the machine normally. You can spray a few rounds of W40 anti-rust oil on the needle area while the machine is running. This will effectively remove the original rust spots on the knitting needles and the oil film produced by the anti-rust oil, making the knitting needles faster. Get into the ideal state. The speed of starting the vehicle should not be too fast and should be done gradually.